Anja Mueller Chair, 2018-01-10 00:40:44. Chairs seem to be one of the least likely types of furniture to survive, when you hear stories like, "one chair broke and granny threw it down the well years ago", or "when the leg broke we used it for fire wood". When it comes to restoring a chair, people object to the price, saying "it‘s too much", or "it‘s not worth it!" There must have been more chairs manufactured than any other item, as they were usually purchased in at least a set of four, yet few examples survive. Quite often, old chairs had very harsh repairs carried out on them: large screws for strengthening joints; steel straps nailed to the legs and side rails, often on the polished faces; large wood blocks glued in or large hunks of wood nailed on for extra strength; and the odd nail that often looks more like a railway spike - all of this plus a good slurp of glue just for luck. A lot of this type of damage, under many layers of upholstery, hides a surprise for the restorer. Trying to get a chair like this apart, repaired and re-glued is a nightmare. Very few chairs have escaped without some type of makeshift or bandaid repair. Full sets of chairs are scarce, and one must accept the concept of a harlequin set or a mixture of complementing chairs to fulfill one‘s chair requirements.
Lea Ebersbacher Chair, 2018-01-03 00:14:15. Australian chairs followed the designs of their European counterparts very closely, the major distinguishing factor being that our local cedar timber was not as hard or as tight grained as the mahogany used in England, and was prone to breaking through the short grain of the back legs or in the shallow turnings and tenons. Bearing these problems in mind, cedar chairs will often have larger proportions to allow for the lesser structural properties, and most examples show considerable wear to the legs, especially the front pair. Fine quality examples of Australian cedar chairs are made of select cuts of cedar utilising the closest and straightest grained timbers for strength and also for their similarity to mahogany. There was quite a prestige associated with being able to afford goods from abroad, primarily England.
Sabrina Eberhardt Chair, 2018-01-03 00:14:23. As we begin, please understand that if you need your new chairs quite quickly, you are going to be very limited in your church chair fabric choices. Several church chair manufacturers and importers have "church chair stocking programs" with "ready to ship" chairs (some more than others) in a few limited fabrics. Most of these fabrics are very basic in color and quality. But for churches with immediate chair needs, it is fortunate there are at least some solutions they can avail themselves of.
Sabrina Eberhardt Chair, 2017-12-17 00:14:10. When you first embark on your search for a tall office chair, the first thing you will want to look for is the chair‘s back dimensions. If you are looking for a tall office chair online, this can typically be found in the product information section or product specs area. All chair manufacturers take the time to take specific measurements of their chairs before they are released to the public in order to avoid returns being made because a chair did not fit a person properly. If the information is not readily available on the website you are looking at, call to inquire and the sales representative should be able to look up the information.
Marina Osterhagen Chair, 2017-12-24 00:14:13. Armless chairs also have a smaller footprint making them great space-savers. Often when office chairs have arms there is the possibility that the chair may not fit properly under your desk which can lead to the hassle of having to return the chair if it does not work for your workplace. Having to measure your desk height along with finding the exact measurements of the chair‘s seat, arm, and overall height can be tedious and difficult. Buying an armless office chair eliminates this hassle with their ability to fit underneath just about any work station or desk without having to worry about taking precise measurements.
Sabrina Eberhardt Chair, 2018-01-04 00:50:37. The 1870s and 80s saw predominantly balloon-back chairs with a variation or the bar-back -the ladder-back chair. The ladder-back chair, although not all that pretty to look at in comparison with the others previously discussed, is probably the sturdiest of all cedar dining chairs, excluding provincial manufactured chairs utilising peg construction methods and leg stretchers. The ladder-back chair has two horizontal back rails that are tenoned into the rear legs, giving both strength and comfort at small sacrifice to style. Even though there were many of this style of chair manufactured, we have repaired surprisingly few with any major damage. We have seen many examples of these, both hard-seated and upholstered versions, usually with turned front legs. Another point worthy of mention is that the back legs are straighter, relying on nature to its fullest with less short grain, giving greater mechanical strength following a straighter line and therefore resulting in a stronger chair.
Anja Mueller Chair, 2018-01-03 00:14:20. A point often forgotten when purchasing chairs is restoration, as few surviving examples would not have been repaired at some stage. When purchasing chairs, it is not unusual to spend more money with a good restorer than you actually paid for the article itself. The repair of a chair, the most used object in the home, is expensive when compared to, say, a chest of drawers. If restored properly, a chest of drawers may need serious attention only once every 50 or so years, where a set of chairs may need attention on a frequent basis. Sets of chairs that are let go for generations often need a lot of attention, even to a point of needing to be steamed apart and re-glued which takes time and patience. A single chair often consumes more time than for a dining table. Even now in our local area, it is not easy to find a competent tradesman to repair sets of chairs, as they all look upon them as ‘charity‘ jobs.
Kathrin Faber Chair, 2018-01-03 00:14:17. If you experience neck pain look for a chair that comes with an adjustable headrest. Again you will need to measure your back to ensure you do not pick a chair that has a back that is too high or too low, otherwise your headrest may end up turning out to be detrimental rather than helpful. Many people suffer from lower back pain from having a chair that does not have proper lumbar support which is why it is crucial to find a chair that offers built-in lumbar support, adjustable lumbar support, or air lumbar support to prevent lower back pain.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does ~Just Chair~ claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.