Lea Ebersbacher Chair, January 13th , 2018. Armless chairs also have a smaller footprint making them great space-savers. Often when office chairs have arms there is the possibility that the chair may not fit properly under your desk which can lead to the hassle of having to return the chair if it does not work for your workplace. Having to measure your desk height along with finding the exact measurements of the chair‘s seat, arm, and overall height can be tedious and difficult. Buying an armless office chair eliminates this hassle with their ability to fit underneath just about any work station or desk without having to worry about taking precise measurements.
Marina Osterhagen Chair, January 14th , 2018. Lightweight: Chiavari chairs are specifically designed to be lightweight. Each chair weighs 10-12 pounds regardless of material, and many models can be lifted with a single finger. Having lightweight chairs is important for your venue because it increases the ease with which your venue can be set up, which means you will be able to allocate your resources to matters that need more intensive attention instead of wasting your staff‘s time trying to move around heavier chairs. Clients also will not struggle should they need to move any of the chairs.
Kathrin Faber Chair, January 14th , 2018. Small Footprint: Unlike so many venue chair options, Chiavari chairs have a relatively small footprint. This means that more chairs can be placed at a table without significantly reducing each guest‘s personal space. Any client will appreciate this ability to seat more guests per table, which offers them the opportunity to not have to use as many tables, meaning more space is available for dance floors or buffet tables. Additionally, Chiavari chairs are stackable for storage. Chairs can be stacked 6 to 8 high, and their small footprint allows you more space than traditional stacking chairs might offer.
Lea Ebersbacher Chair, January 14th , 2018. Perhaps the greatest advantage to purchasing an armless office chair over a chair with arms is the price discount you will receive. Armless chairs will always be less in price over a chair with arms because the cost for adding a set of arms to a chair always results in an increase in price. Equipping your office with armless chairs over chairs with arms is a viable choice for those on a budget as it will end up saving you hundreds of dollars in the long run.
Kathrin Faber Chair, January 14th , 2018. In this same period, the balloon-back chair was also introduced, but not without problems as, again, the Australian cedar timber was not very kind to both designers and manufacturers alike. The balloon-back chair is certainly pleasing to the eye but, unfortunately, its weakness lies in where the balloon back joins the rear legs, along with the other problems that the traditional bar back may have had. They are an excellent chair but must certainly be treated with respect; that is, pick them up with both hands or by the back rail, not the splat. It only makes sense and, if considered, the balloon back chair must be weaker as the cresting rail (top rail) is often held with a single dowel on each side of the balloon as opposed to a tapered dovetail joint as seen on rail-back chairs of the period. These chairs mostly have turned legs, but occasionally the hoop and legs are carved; they were covered with sprung stuff over seats often in leather or simulated leather.
Anja Mueller Chair, January 14th , 2018. Folding chairs have been around for centuries and were most popular during the middle ages. Wood was the original material for these chairs which were used during the old days in various parts of the world such as ancient Egypt, Rome, Europe and Greece. During the 15th and 16th centuries, the folding chair grew even more popular and began to have arms and headrests in order to provide more comfort to its user. Since then, many variations of the chair have come up in the form of aluminum folding chairs, metal chairs and many more.
Lea Ebersbacher Chair, January 14th , 2018. The last factor to consider is how adjustable you will need your ultimate ergonomic chair to be. If you work for more 8 or more hours a day, you will likely need a highly adjustable chair that allows you to recline throughout the day with tilt lock and tilt tension control(allows the user to choose the amount of tension needed to recline back in their chair and to lock their chair in the upright position when typing then unlock when recline is desired). If you are a taller or shorter individual, it may be beneficial to have a seat slider adjustment that allows you to determine make your chair‘s seat depth either longer or shorter.
Sabrina Eberhardt Chair, January 14th , 2018. Next you will need to figure out the seat height range necessary for you to be able to keep your feet flat on the floor while working(or on a foot rest) and work with your height. You will also need to take into consideration the height of your desk to ensure your chair will fit underneath your desk if needed, especially if you would like a chair with armrests. Most standard desks are 29" measured from the floor to the top of the desk, however some have higher workstations or adjustable desks that can be lowered and raised if needed. If you are a shorter individual a standard cylinder that comes with most office chairs may be too tall for you causing your legs to be bent at an awkward angle. The same can be said for taller individuals who need a longer cylinder and higher seat height adjustment range. Certain specialty ergonomic office chairs offer different cylinder size options to accommodate individuals of any height from children 4‘ tall to adults that are 6‘8".
Marina Osterhagen Chair, January 14th , 2018. Material: If what you need are some sturdy chairs that will last a lifetime, wooden chairs can be a great solution. In school halls you will find chairs that date back many eras and decades. Wood is tough and strong, and as long as it is only ever used indoors, the lifespan is extremely long. Wood however is not the cheapest material for your chairs, and these days there are many more economical alternatives available. Metal Folding Chairs: A modern-day alternative to the traditional folding wooden chair is metal folding chairs. They can be a great addition to any home or garden and can be color coordinated with the rest of your home. Also used as the perfect addition to your office, sleek metal chairs will look classy whilst saving space in the work place.
Sabrina Eberhardt Chair, January 14th , 2018. The 1870s and 80s saw predominantly balloon-back chairs with a variation or the bar-back -the ladder-back chair. The ladder-back chair, although not all that pretty to look at in comparison with the others previously discussed, is probably the sturdiest of all cedar dining chairs, excluding provincial manufactured chairs utilising peg construction methods and leg stretchers. The ladder-back chair has two horizontal back rails that are tenoned into the rear legs, giving both strength and comfort at small sacrifice to style. Even though there were many of this style of chair manufactured, we have repaired surprisingly few with any major damage. We have seen many examples of these, both hard-seated and upholstered versions, usually with turned front legs. Another point worthy of mention is that the back legs are straighter, relying on nature to its fullest with less short grain, giving greater mechanical strength following a straighter line and therefore resulting in a stronger chair.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does ~Just Chair~ claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.